Global
Monomers

Welcome to the Ludwigshafen site


Do you want to pick up materials, listed below at the Ludwigshafen site?

The following information will assist you in planning.

 
   
5-10 days before loading   You will receive information for registration of your pickup by E-Mail.
2 days before loading   

Please register your pickup directly with this form. You will then receive the loading reference from us. 

No pickup possible without loading reference.

On the day of loading

 

 
  • You can check in with loading reference between 6 am and 3 pm at Gate 15.
  • Before loading, the vehicle as well as the safety and hazardous materials equipment is inspected. Transporting hazardous materials requires a valid ADR license.
  • An ECD cleaning certificate is also mandatory. The certificate may not be older than 3 days.
  • Loading takes place at loading station F300. The loading station closes at 4 pm.
Previous load  

Please note the impermissible/permissible previous load when transporting propylene glycol and dipropylene glycol.

 
 

 

5-10 days before loading   You will receive information for registration of your pickup by E-Mail.
2 days before loading  

Please register your pickup directly with this form. You will then receive the loading reference from us. 

No pickup possible without loading reference.

On the day of loading

 

 
  • You can check in with loading reference between 6 am and 3 pm at BASF SE Sewage Treatment Plant.
  • Loading takes place at other loading station, you will receive details after registration.
  • Before loading, the vehicle as well as the safety and hazardous materials equipment is inspected. Transporting hazardous materials requires a valid ADR license.
  • Please remember to use anti-slip mats (9 mats per pallet, minimum size of 20x30 cm).

 
   
24 hours before loading   

Please register your pickup directly with this form or with your BASF contact person. You will then receive the loading reference from us.

On the day of loading

 

 
  • You can register between 6 am and 2 pm at Gate 15 (depending on the loading time).
  • Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Transporting hazardous materials requires a valid ADR license.
  • Loading takes place at loading station U050. The loading station closes at 3 pm.

Visit us at K 2022