Antwerpen, im Norden von Belgien, ist der zweitgrößte Produktionsstandort der BASF. Der Verbundstandort steht in direkter Verbindung mit der Nordsee, dem Antwerpener Hafen und dem europäischen Hinterland. BASF Antwerpen ist ca. sechs Quadratkilometer groß und zählt 50 Produktionsanlagen, verteilt über 15 integrierte Wertschöpfungsketten.

Monomers

Welcome to the Antwerp site

Do you want to pick up materials, listed below at the Antwerp site?

The following information will assist you in planning.

1,2-propylene glycol technical (bulk)


2-10 days before loading			You will receive information for registration of your pickup by E-Mail.
2 days before loading			Please register your pickup directly with this form. You will then receive the loading reference from us. No pickup possible without loading reference.
Until 12 noon on the day prior to loading			Contact us at po-planning-antwerp@basf.com, to book a pick-up slot. Please state the loading reference you received during registration. Possible loading slots: 9 am, 10 am, 11 am, 1 pm and 2 pm
On the day of loading			Registration at Gate 6 no later than 30 minutes prior to loading. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. An ECD cleaning certificate is mandatory. This certificate must not be older than 14 calendar days (tank vehicles) or 50 calendar days (tank containers). Please register in building D721 prior to loading. Additional information on the site procedure is available here.
Permissible previous loads			EN Preloading list NL Voorproductlijst
Notes on equipment			The minimum and maximum filling levels (ADR 80/20 rule) must be observed at all times. Only single-chamber tank vehicles and containers are permitted. The manhole must have a minimum diameter of 50 cm.

BULK: Lupranol


2-10 days before loading		You will receive information for registration of your pickup by E-Mail.
2 days before loading		Please register your pickup directly with this form. You will then receive the loading reference from us. No pickup possible without loading reference.
Until 12 noon on the day prior to loading		Contact us at Polyol-Basant-Bulk@basf.com, to check the previous load. Please state the loading reference you received during registration.
On the day of loading		You can register at Gate 15 no later than 30 minutes prior to loading and consider call-off process. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. An ECD cleaning certificate is mandatory. This certificate must not be older than 14 calendar days (tank vehicles) or 50 calendar days (tank containers). Additional information on the site procedure is available here.
Permissible previous loads		Please note the permissible previous load when transporting in our "permissible load databank".
Notes on equipment		The minimum and maximum filling levels (ADR 80/20 rule) must be observed at all times. Only single-chamber tank vehicles and containers are permitted. Minimum height tanktruck / tankcontainer: 3,50m

Drum or IBC: Lupranol


3-10 days before loading		You will receive information for registration of your pickup by E-Mail.
3 days before loading		Please register your pickup directly with this form. You will then receive the BASF loading reference from us.
2 days before loading		Contact us at timeslots.packed@adpo.com, to book a pick-up slot with the received BASF loading reference. Driver will get a unique QR code which is required for the registration. No pickup possible without QR code (digital or hard copy). Possible loading slots: Hourly between 6 am and 5 pm
On the day of loading		Truck driver must speak French, English, Dutch or German. Registration at ADPO no later than 30 minutes prior to loading. This can be done by either scan the QR code or entering the unique code in the console. The driver will be informed (mobile phone) when the documents for operation are ready at the counter. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Please remember to use anti-slip mats (9 mats per pallet, minimum size of 20x30 cm).

BULK: Lupranat / Iso (MDI)


2-10 days before loading		You will receive information for registration of your pickup by E-Mail.
2 days before loading		Please register your pickup directly with this form. You will then receive the loading reference from us. No pickup possible without loading reference.
On the day of loading		You can register at Gate 15 no later than 30 minutes prior to loading. Please consider the booked loading slot. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Additional information on the site procedure is available here.
Permissible previous loads		Please note the rules of permissible previous loads and matrix preloading MDI.
Notes on equipment		Depending on material: Temperature controlled equipment necessary, you receive correct temperature during registration. The minimum and maximum filling levels (ADR 80/20 rule) must be observed at all times. Equipment must be ISOPA conform. Cleaned tank: ECD cleaning certificate and dew point certificate mandatory. Certificates may not be older than 3 days. Empty / Uncleaned tank: Please note the rules of permissible previous loads / matrix preloading MDI

Drum or IBC: Lupranat / Iso (MDI)


2-10 days before loading		You will receive information for registration of your pickup by E-Mail.
2 days before loading		Please register your pickup directly with this form. You will then receive the loading reference from us. No pickup possible without loading reference.
On the day of loading		Depending on material: Temperature controlled equipment necessary, you receive correct temperature during registration. You can register at Gate 6 no later than 30 minutes prior to loading. Please consider the booked loading slot. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Please remember to use anti-slip mats (9 mats per pallet, minimum size of 20x30 cm). Additional information on the site procedure is available here.

ANILINE


2-10 days before loading		You will receive information for registration of your pickup by E-Mail.
2 days before loading		Please register your pickup directly with this form. You will then receive the loading reference from us. No pickup possible without loading reference.
On the day of loading		You can register at Gate 15 no later than 30 minutes prior to loading. Please consider the booked loading slot. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Additional information on the site procedure is available here.
Notes on equipment		Tank must be L4BN with tank code T7; otherwise, L4BH Only one chamber The minimum and maximum filling levels (ADR 80/20 rule) must be observed at all times. Loading method: Top loading Loading arm with cone (diameter 300–600 mm), no dipstick N₂ connection: DN25 Gas return line: Via cone
Previous load		All vehicles must be cleaned, Cleaning Certificate Validity: Tanker truck: 14 calendar days Container: 50 calendar days Previous Load: No strict ban, but some are less suitable (e.g. oil = hard to clean). Final decision in responsibility of customer. Questions? Contact: logistiekan@basf.com

Additional Information