Antwerpen, im Norden von Belgien, ist der zweitgrößte Produktionsstandort der BASF. Der Verbundstandort steht in direkter Verbindung mit der Nordsee, dem Antwerpener Hafen und dem europäischen Hinterland. BASF Antwerpen ist ca. sechs Quadratkilometer groß und zählt 50 Produktionsanlagen, verteilt über 15 integrierte Wertschöpfungsketten.

Monomers

Catalysts Intermediates Monomers Petrochemicals

Monomers

Welcome to the ADPO site

Do you want to pick up Lupranat T 80 at the ADPO site?

The following information will assist you in planning.

BULK: Lupranat T 80


3-10 days before loading		You will receive information for registration of your pickup by E-Mail.
3 days before loading		Please register your pickup directly with this form. You will then receive the BASF loading reference from us.
2 days before loading		Book a pick-up slot at Timeslot planning ADPO with the received BASF loading reference. Driver will get a unique QR code which is required for the registration. No pickup possible without QR code (digital or hard copy). Possible loading slots: Hourly between 6 am and 5 pm
On the day of loading		Truck driver must speak French, English, Dutch or German. Registration at ADPO no later than 30 minutes prior to loading. This can be done by either scan the QR code or entering the unique code in the console. The driver will be informed (mobile phone) when the documents for operation are ready at the counter. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Truck driver needs valid ISOPA and ADR licenses.
Permissible previous loads		Permissible previous loads
Notes on equipment		Only iso containers accepted, when these are positioned at the ultimate rear/back of the container chassis. Or when the presented container chassis is of the type ‘walk-in chassis’. Example Equipment must be ISOPA conform. Cleaned tank: ECD cleaning certificate and dew point certificate mandatory. Certificates may not be older than 3 days. Empty / Uncleaned tank: Please note the permissible previous loads.

Packed: Lupranat T 80


3-10 days before loading		You will receive information for registration of your pickup by E-Mail.
3 days before loading		Please register your pickup directly with this form. You will then receive the BASF loading reference from us.
2 days before loading		Book a timeblock at Timeslot planning ADPO with the received BASF loading reference. Driver will get a unique QR code which is required for the registration. No pickup possible without QR code (digital or hard copy). Possible loading slots: Timeblock 1: from 08h00 till 10h30; Timeblock 2: from 10h30 till 13h00; Timeblock 3: from 13h00 till 15h30
On the day of loading		Truck driver must speak French, English, Dutch or German. Registration at LLH = Liefkenshoek Logistic Hub NV no later than 30 minutes prior to loading. This can be done by either scan the QR code or entering the unique code in the console. The driver will be informed (mobile phone) when the documents for operation are ready at the counter. Following registration, the vehicle as well as the safety and hazardous materials equipment is inspected. Truck driver needs valid ADR licenses. Please remember to use anti-slip mats (9 mats per pallet, minimum size of 20x30 cm).

Additional information